Mars Drift Bumper Car (2nd Gen) | Digital Sports Equipment
A drift bumper car with 48 V 500 W drive, LED lighting and a laser battle mode: fixed and continuous drift techniques, team battle, and a remote set game timer.
The second generation Mars drift car is built on a thickened high hardness glass fibre reinforced plastic body with an imported ABS hull, finished in high visibility colour with LED lighting. Drive is a 48 V 500 W motor, and the car is started and stopped from the remote rather than a key.
Driving and drifting
Stepless throttle and a disc brake; the player buys a ticket, enters the arena, fastens the seatbelt and waits for staff to start the car.
Fixed direction drift: bring the car to a speed you can control, turn the wheel into the drift direction and accelerate, holding the wheel so the body slides sideways.
Continuous drift: while sliding, brake lightly, turn the wheel to the opposite direction, accelerate, then straighten the car and apply throttle again.
Battle mode
Battle mode adds laser tag to the chase. Aim at the sensor zones on the left, right or rear of another car, then press the fire button; shots are unlimited. Press 1 for the red team, 2 for the blue team and 3 for melee, where every player can attack. With no button pressed the car runs in free mode and cannot be hit.
Safety rules
Underage players must not make full speed head on collisions.
The seatbelt must stay fastened for the whole session; do not undo it mid game.
Do not leave the car while the session is running.
The car is heavy, so keep collisions controlled to avoid injury.
Remote and settings
New remote: A starts the car and D stops it.
Older remote: A sets 5 minutes, B sets 10 minutes and C stops the car.
Session length is fixed at the factory; a venue that needs a different time contacts the factory to exchange the remote and receiver.
Drive speed is fixed.
To pair a remote, open the shell, press any button on the remote, then press the button on the white receiver.
The four digit display shows remaining battery time first, then the session countdown.
Running the arena
Round length is worth agreeing before delivery: the session timer is fixed at the factory, and changing it later means exchanging the remote and receiver. On the floor the flow is ticket, seatbelt, then a start from the remote, and for battle sessions players pick red team, blue team or melee before the start signal. The four digit display shows remaining battery time before the countdown, so staff can plan charging around busy periods.